VALVES
Add CLACK, FLECK and SIATA
Pentair (Osmonics) Autotrol produce a range of valves from 3/4” to 2” covering flow rates up to 17m3 /hour (34m3/hr high flow duplex). These valves are used on SOFTENERS and FILTERS. The majority of the products are constructed in durable corrosion resistant Noryl plastic. They have heat welded bodies that are 100% tested prior to shipment and feature the unique and reliable “Duraflow” valve disc technology. These valves fall into four ranges, each of which has a number of control options. The 255 and 268 valves are WRAS listed.
|
|
255 Valve 3/4" ports |
263/268 Valves, 1" ports
|
Softener/Filter
Service flow: <3.5 m3/hr Backwash: <1.3 m3/hr Ports: 3/4" Pressure: 1.5 to 8 bar WRAS approved valve
|
298 Magnum Valve, 2" ports |
263 : Filter valve 268 Softener valve
Service flow: <5.7 m3/hr Backwash: <4.5 m3/hr Ports: 1" Pressure: 1.5 to 8 bar clean water brine refill WRAS approved valve
|
278 Valve 1" ports
278 Softener valve commercial softeners to 21"
Service flow: <5.7 m3/hr Backwash: <4.5 m3/hr Ports: 1" Pressure: 1.5 to 8 bar WRAS approved valve
|
293 : Filter valve 298 Softener valve
Service flow: <17 m3/hr Backwash: <20 m3/hr Ports: 2" Pressure: 1.5 to 8 bar
|
Duplex Autotrol multiport valves (764 series) |
Valve controllers |
The duplex valves work in duty/standby or high flow mode, 3/4" to 2" ports covering flow rates up to 34m3/hr
255-764, Service 3.5 m3/hr 278-764, service 5.7m3/hr 298-764 service 17 m3/hr high flow doubles flow rate
|
All valves are fitted with a controller. Logix 740,742, (time)~ ,760,762 (metered) are current models.
older models: 440i (Time) & $60i (Meter)
|